REFERENCES
1. Miracle, D. Metal matrix composites - from science to technological significance. Compos. Sci. Technol. 2005, 65, 2526-40.
2. Ramanathan, A.; Krishnan, P. K.; Muraliraja, R. A review on the production of metal matrix composites through stir casting - Furnace design, properties, challenges, and research opportunities. J. Manuf. Process. 2019, 42, 213-45.
3. Kim, C.; Cho, K.; Manjili, M. H.; Nezafati, M. Mechanical performance of particulate-reinforced Al metal-matrix composites (MMCs) and Al metal-matrix nano-composites (MMNCs). J. Mater. Sci. 2017, 52, 13319-49.
4. Samal, P.; Vundavilli, P. R.; Meher, A.; Mahapatra, M. M. Recent progress in aluminum metal matrix composites: A review on processing, mechanical and wear properties. J. Manuf. Process. 2020, 59, 131-52.
5. Surappa, M. K. Aluminium matrix composites: challenges and opportunities. Sadhana 2003, 28, 319-34.
6. Dong, L.; Mi, G.; Li, C.; Xu, L.; Wei, J. Effects of SiC particle volume fraction on microstructure and mechancial properties of SiCp/6061Al composites. Integr. Ferroelectr. 2020, 210, 215-26.
7. Tang, S.; Shao, S.; Liu, H.; et al. Microstructure and mechanical behaviors of 6061 Al matrix hybrid composites reinforced with SiC and stainless steel particles. Mater. Sci. Eng. A. 2021, 804, 140732.
8. Li, J.; Laghari, R. A. A review on machining and optimization of particle-reinforced metal matrix composites. Int. J. Adv. Manuf. Technol. 2018, 100, 2929-43.
9. Bakshi, S. R.; Agarwal, A. An analysis of the factors affecting strengthening in carbon nanotube reinforced aluminum composites. Carbon 2011, 49, 533-44.
10. Thostenson, E. T.; Ren, Z.; Chou, T. Advances in the science and technology of carbon nanotubes and their composites: a review. Compos. Sci. Technol. 2001, 61, 1899-912.
11. Liu, J.; Ding, R.; Cao, J.; et al. Recent progress in architecture design of nanocarbon-reinforced metal matrix composites and their properties: a review. Carbon 2024, 228, 119382.
12. Bartolucci, S. F.; Paras, J.; Reif, J.; et al. Graphene-aluminum nanocomposites. Mater. Sci. Eng. A. 2011, 528, 7933-7.
13. Sheinerman, A. G. Mechanical properties of metal matrix composites with graphene and carbon nanotubes. Phys. Metals. Metallogr. 2022, 123, 57-84.
14. Fan, G.; Jiang, Y.; Tan, Z.; et al. Enhanced interfacial bonding and mechanical properties in CNT/Al composites fabricated by flake powder metallurgy. Carbon 2018, 130, 333-9.
15. Zhang, P. F.; Zhou, L.; Ran, Y. C. Finite element analysis and comparison of the machinability of SiCp/Al composite and CNT/Al composite. J. Inst. Eng. India. Ser. C. 2019, 101, 323-9.
16. Bakshi, S. R.; Lahiri, D.; Agarwal, A. Carbon nanotube reinforced metal matrix composites - a review. Int. Mater. Rev. 2013, 55, 41-64.
17. Mohammed, S. M. A. K.; Chen, D. L. Carbon nanotube‐reinforced aluminum matrix composites. Adv. Eng. Mater. 2019, 22, 1901176.
18. Nie, X.; Bahrami, A. Effect of carbon nanotubes on mechanical properties of aluminum matrix composites: a review. Sci. Eng. Compos. Mater. 2024, 31, 20240009.
19. Nam, D. H.; Cha, S. I.; Lim, B. K.; Park, H. M.; Han, D. S.; Hong, S. H. Synergistic strengthening by load transfer mechanism and grain refinement of CNT/Al-Cu composites. Carbon 2012, 50, 2417-23.
20. He, C.; Zhao, N.; Shi, C.; et al. An approach to obtaining homogeneously dispersed carbon nanotubes in Al Powders for preparing reinforced Al‐matrix composites. Adv. Mater. 2007, 19, 1128-32.
21. Izadi, H.; Gerlich, A. P. Distribution and stability of carbon nanotubes during multi-pass friction stir processing of carbon nanotube/aluminum composites. Carbon 2012, 50, 4744-9.
22. Liu, Q.; Ke, L.; Liu, F.; Huang, C.; Xing, L. Microstructure and mechanical property of multi-walled carbon nanotubes reinforced aluminum matrix composites fabricated by friction stir processing. Mater. Des. 2013, 45, 343-8.
23. Lim, D.; Shibayanagi, T.; Gerlich, A. Synthesis of multi-walled CNT reinforced aluminium alloy composite via friction stir processing. Mater. Sci. Eng. A. 2009, 507, 194-9.
24. Owa, T.; Shimizu, Y.; Kaiume, S.; Hashimoto, Y. Effect of sintered reinforcement on characteristics of MWCNT-reinforced aluminum alloy composite via friction stir processing. Mater. Trans. 2019, 60, 1018-25.
25. Esawi, A.; Morsi, K.; Sayed, A.; Taher, M.; Lanka, S. The influence of carbon nanotube (CNT) morphology and diameter on the processing and properties of CNT-reinforced aluminium composites. Compos. Part. A. 2011, 42, 234-43.
26. Cao, L.; Chen, B.; Wan, J.; et al. Unraveling the dispersion mechanism of carbon nanotubes in aluminum powder particles during high energy ball milling by FIB-TEM study. Powder. Technol. 2023, 419, 118339.
27. Liao, J.; Tan, M. Mixing of carbon nanotubes (CNTs) and aluminum powder for powder metallurgy use. Powder. Technol. 2011, 208, 42-8.
28. Basariya M, Srivastava V, Mukhopadhyay N. Microstructural characteristics and mechanical properties of carbon nanotube reinforced aluminum alloy composites produced by ball milling. Mater. Des. 2014, 64, 542-9.
29. Cao, L.; Chen, B.; Wan, J.; Shen, J.; Li, J. Improving carbon nanotube dispersion in aluminum matrix composite powders by a repeating-deformation ball milling process. Mater. Charact. 2023, 201, 112986.
30. Majid, M.; Majzoobi, G. H.; Noozad, G. A.; Reihani, A.; Mortazavi, S. Z.; Gorji, M. S. Fabrication and mechanical properties of MWCNTs‐reinforced aluminum composites by hot extrusion. Rare. Metals. 2012, 31, 372-8.
31. Choi, H.; Shin, J.; Min, B.; Park, J.; Bae, D. Reinforcing effects of carbon nanotubes in structural aluminum matrix nanocomposites. J. Mater. Res. 2011, 24, 2610-6.
32. Cao, J.; Li, F.; Yang, Q.; et al. A review on interfacial structure optimization and its mechanism on the properties of carbon reinforced metal-matrix composites. Compos. Interfaces. 2023, 30, 543-83.
33. Fan, G.; Yu, Z.; Tan, Z.; Li, Z.; Zhang, D. Evolution, control, and effects of interface in CNT/Al composites: a review. Acta. Metall. Sin. 2014, 27, 839-43.
34. Chen, B.; Kondoh, K.; Imai, H.; Umeda, J.; Takahashi, M. Simultaneously enhancing strength and ductility of carbon nanotube/aluminum composites by improving bonding conditions. Scr. Mater. 2016, 113, 158-62.
35. Chen, B.; Shen, J.; Ye, X.; et al. Solid-state interfacial reaction and load transfer efficiency in carbon nanotubes (CNTs)-reinforced aluminum matrix composites. Carbon 2017, 114, 198-208.
36. Sadeghi, B.; Shamanian, M.; Cavaliere, P.; Ashrafizadeh, F. Effect of processing parameters on the microstructural and mechanical properties of aluminum-carbon nanotube composites produced by spark plasma sintering. Int. J. Mater. Res. 2018, 109, 900-9.
37. Housaer, F.; Beclin, F.; Touzin, M.; Tingaud, D.; Legris, A.; Addad, A. Interfacial characterization in carbon nanotube reinforced aluminum matrix composites. Mater. Charact. 2015, 110, 94-101.
38. Yuan, C.; Zhang, Z.; Tan, Z.; et al. Enhanced ductility by Mg addition in the CNT/Al-Cu composites via flake powder metallurgy. Mater. Today. Commun. 2021, 26, 101854.
39. Liu, X.; Li, C.; Yi, J.; et al. Enhancing the interface bonding in carbon nanotubes reinforced Al matrix composites by the in situ formation of TiAl3 and TiC. J. Alloys. Compd. 2018, 765, 98-105.
40. Ma, E. Instabilities and ductility of nanocrystalline and ultrafine-grained metals. Scr. Mater. 2003, 49, 663-8.
41. Ovid'ko, I.; Valiev, R.; Zhu, Y. Review on superior strength and enhanced ductility of metallic nanomaterials. Prog. Mater. Sci. 2018, 94, 462-540.
42. Liu, Q.; Fan, G.; Tan, Z.; et al. Reinforcement with intragranular dispersion of carbon nanotubes in aluminum matrix composites. Compos. Part. B. Eng. 2021, 217, 108915.
43. Sadeghi, B.; Cavaliere, P.; Pruncu, C. I. Architecture dependent strengthening mechanisms in graphene/Al heterogeneous lamellar composites. Mater. Charact. 2022, 188, 111913.
44. Zhao, L.; Zheng, W.; Hu, Y.; Guo, Q.; Zhang, D. Heterostructured metal matrix composites for structural applications: a review. J. Mater. Sci. 2024, 59, 9768-801.
45. Liu, L.; Li, S.; Pan, D.; et al. Loss-free tensile ductility of dual-structure titanium composites via an interdiffusion and self-organization strategy. Proc. Natl. Acad. Sci. USA. 2023, 120, e2302234120.
46. Sadeghi, B.; Cavaliere, P.; Sadeghian, B. Enhancing strength and toughness of aluminum laminated composites through hybrid reinforcement using dispersion engineering. J. Compos. Sci. 2023, 7, 332.
47. Ghari, H.; Taherizadeh, A.; Sadeghian, B.; Sadeghi, B.; Cavaliere, P. Metallurgical characteristics of aluminum-steel joints manufactured by rotary friction welding: a review and statistical analysis. J. Mater. Res. Technol. 2024, 30, 2520-50.
48. Nie, J.; Chen, Y.; Song, L.; et al. Enhancing strength and ductility of Al-matrix composite via a dual-heterostructure strategy. Int. J. Plast. 2023, 171, 103825.
49. Xu, Z.; Li, C.; Wang, Z.; et al. Balancing the strength and ductility of graphene oxide-carbon nanotube hybrid reinforced aluminum matrix composites with bimodal grain distribution. Mater. Sci. Eng. A. 2020, 796, 140067.
50. Xu, Z.; Li, C.; Gao, P.; et al. Improving the mechanical properties of carbon nanotubes reinforced aluminum matrix composites by heterogeneous structural design. Compos. Commun. 2022, 29, 101050.
51. Sadeghi, B.; Cavaliere, P. Effect of bimodal grain structure on the microstructural and mechanical evolution of Al-Mg/CNTs composite. Metals 2021, 11, 1524.
52. Bi, S.; Li, Z. C.; Sun, H. X.; et al. Microstructure and mechanical properties of carbon nanotubes-reinforced 7055Al composites fabricated by high-energy ball milling and powder metallurgy processing. Acta. Metall. Sin. 2021, 57, 71-81.
53. Salama, E. I.; Abbas, A.; Esawi, A. M. Preparation and properties of dual-matrix carbon nanotube-reinforced aluminum composites. Compos. Part. A. Appl. Sci. Manuf. 2017, 99, 84-93.
54. Fu, X.; Tan, Z.; Min, X.; et al. Trimodal grain structure enables high-strength CNT/Al-Cu-Mg composites higher ductility by powder assembly & alloying. Mater. Res. Lett. 2020, 9, 50-7.
55. Bhadauria, A.; Singh, L. K.; Nayak, S. K.; Laha, T. Tensile deformation behavior and strengthening mechanism in graphene nanoplatelet reinforced bimodal grained aluminum nanocomposite synthesized by spark plasma sintering and hot rolling. Mater. Charact. 2020, 168, 110568.
56. Raj R, Yoganandh J, Senthil Saravanan MS, Ram Prabhu T. Mechanical and tribological properties of graphene-reinforced bimodal AA7075 composites. Trans. Indian. Inst. Met. 2024, 77, 1651-60.
57. Li, P.; Li, X.; Liu, Z.; Chen, L.; Xiao, B.; Ma, Z. Enhanced strength-ductility synergy of carbon nanotube/Al-Cu-Mg composites via introducing laminate structure and grain modification. Compos. Part. B. Eng. 2022, 243, 110178.
58. Li, P.; Li, X.; Ma, K.; et al. Improvement of mechanical properties in carbon nanotube/Al-Cu-Mg composites through introducing bioinspired tree-ring structure. Compos. Commun. 2023, 37, 101462.
59. Jiang, L.; Li, Z.; Fan, G.; Cao, L.; Zhang, D. Strong and ductile carbon nanotube/aluminum bulk nanolaminated composites with two-dimensional alignment of carbon nanotubes. Scr. Mater. 2012, 66, 331-4.
60. Li, Z.; Guo, Q.; Li, Z.; et al. Enhanced mechanical properties of graphene (reduced graphene oxide)/aluminum composites with a bioinspired nanolaminated structure. Nano. Lett. 2015, 15, 8077-83.
61. Chen, N.; Song, Y.; Sun, J.; et al. A convenient fabrication strategy of laminated graphene/aluminum composite via pulse current diffusion bonding. Ceram. Int. 2024, 50, 41970-4.
62. Lin, X.; Rong, X.; Pu, B.; et al. Gaining strength-ductility combination in Al matrix composites with in-situ synthesized three-dimensional nanocarbon network. J. Alloys. Compd. 2024, 970, 172542.
63. Wan, J.; Chen, B.; Zhou, X.; et al. CNT-induced heterogeneous matrix grain structure in CNTs/Al composites. Carbon 2024, 216, 118529.
64. Choi, H.; Shin, J.; Bae, D. Self-assembled network structures in Al/C60 composites. Carbon 2010, 48, 3700-7.
65. Sharma, A.; Morisada, Y.; Fujii, H. Bending induced mechanical exfoliation of graphene interlayers in a through thickness Al-GNP functionally graded composite fabricated via novel single-step FSP approach. Carbon 2022, 186, 475-91.
66. Kwon, H.; Bradbury, C. R.; Leparoux, M. Fabrication of functionally graded carbon nanotube-reinforced aluminum matrix composite. Adv. Eng. Mater. 2010, 13, 325-9.
67. Borand, G.; Uzunsoy, D. Fabrication of functionally graded few-layered graphene reinforced Al-4.5Cu alloy by powder metallurgy. J. Alloys. Compd. 2022, 923, 166348.
68. Carvalho, O.; Buciumeanu, M.; Madeira, S.; Soares, D.; Silva, F.; Miranda, G. Optimization of AlSi-CNTs functionally graded material composites for engine piston rings. Mater. Des. 2015, 80, 163-73.
69. Zhu, Y.; Ameyama, K.; Anderson, P. M.; et al. Heterostructured materials: superior properties from hetero-zone interaction. Mater. Res. Lett. 2020, 9, 1-31.
70. Fan, G.; Choo, H.; Liaw, P.; Lavernia, E. Plastic deformation and fracture of ultrafine-grained Al-Mg alloys with a bimodal grain size distribution. Acta. Mater. 2006, 54, 1759-66.
71. Ma, K.; Liu, Z.; Liu, K.; Chen, X. G.; Xiao, B.; Ma, Z. Structure optimization for improving the strength and ductility of heterogeneous carbon nanotube/Al-Cu-Mg composites. Carbon 2021, 178, 190-201.
72. Fu, X.; Tan, Z.; Ma, Z.; et al. Powder assembly & alloying to CNT/Al-Cu-Mg composites with trimodal grain structure and strength-ductility synergy. Compos. Part. B. Eng. 2021, 225, 109271.
73. Sadeghi, B.; Cavaliere, P. CNTs reinforced Al-based composites produced via modified flake powder metallurgy. J. Mater. Sci. 2022, 57, 2550-66.
74. Huang, C.; Wang, Y.; Ma, X.; et al. Interface affected zone for optimal strength and ductility in heterogeneous laminate. Mater. Today. 2018, 21, 713-9.
75. Han, F.; Jiang, Y.; Cao, F.; Cai, L.; Zhang, H.; Liang, S. Role of gradient heterogeneous interfaces in synergetic strengthening and toughening of layered CuCrZr/Cu composites. Mater. Sci. Eng. A. 2023, 885, 145613.
76. Ferreira, F.; Ferreira, I.; Camacho, E.; Lopes, F.; Marques, A.; Velhinho, A. Graphene oxide-reinforced aluminium-matrix nanostructured composites fabricated by accumulative roll bonding. Compos. Part. B. Eng. 2019, 164, 265-71.
77. Ramkumar, K. R.; Dinaharan, I.; Murugan, N.; Kim, H. S. Development of aluminum matrix composites through accumulative roll bonding: a review. J. Mater. Sci. 2024, 59, 8606-49.
78. Lahiri, D.; Bakshi, S.; Keshri, A.; Liu, Y.; Agarwal, A. Dual strengthening mechanisms induced by carbon nanotubes in roll bonded aluminum composites. Mater. Sci. Eng. A. 2009, 523, 263-70.
79. Zhang, X.; Zhao, N.; He, C. The superior mechanical and physical properties of nanocarbon reinforced bulk composites achieved by architecture design - A review. Prog. Mater. Sci. 2020, 113, 100672.
80. Sadeghi, B.; Cavaliere, P.; Velashjerdi, M.; et al. A 3D interconnected CNT-RGO hybrid networks for Al matrix composites: unveiling a new pathway to superior strength-ductility balance. Compos. Part. B. Eng. 2025, 305, 112746.
81. Liu, X.; Li, J.; Sha, J.; et al. In-situ synthesis of graphene nanosheets coated copper for preparing reinforced aluminum matrix composites. Mater. Sci. Eng. A. 2018, 709, 65-71.
82. Liu, X.; Li, J.; Liu, E.; He, C.; Shi, C.; Zhao, N. Towards strength-ductility synergy with favorable strengthening effect through the formation of a quasi-continuous graphene nanosheets coated Ni structure in aluminum matrix composite. Mater. Sci. Eng. A. 2019, 748, 52-8.
83. Li, X.; Lu, L.; Li, J.; Zhang, X.; Gao, H. Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys. Nat. Rev. Mater. 2020, 5, 706-23.
84. Shao, C.; Zhang, P.; Zhu, Y.; Zhang, Z.; Tian, Y.; Zhang, Z. Simultaneous improvement of strength and plasticity: additional work-hardening from gradient microstructure. Acta. Mater. 2018, 145, 413-28.
85. Lu, K. Nanomaterials. Making strong nanomaterials ductile with gradients. Science 2014, 345, 1455-6.
86. Cheng, Z.; Zhou, H.; Lu, Q.; Gao, H.; Lu, L. Extra strengthening and work hardening in gradient nanotwinned metals. Science 2018, 362, 559.
87. Qin, S.; Yang, M.; Jiang, P.; et al. Designing structures with combined gradients of grain size and precipitation in high entropy alloys for simultaneous improvement of strength and ductility. Acta. Mater. 2022, 230, 117847.
88. Sadeghi, B.; Cavaliere, P.; Shamanian, M.; Sanayei, M.; Szpunar, J. A.; Nosko, M. Electron backscattered diffraction analysis of friction stir processed nanocomposites produced via spark plasma sintering. J. Microsc. 2018, 271, 145-63.
89. Liu, Z.; Ma, K.; Fan, G.; et al. Enhancement of the strength-ductility relationship for carbon nanotube/Al-Cu-Mg nanocomposites by material parameter optimisation. Carbon 2020, 157, 602-13.
90. Wu, X.; Zhu, Y. Heterogeneous materials: a new class of materials with unprecedented mechanical properties. Mater. Res. Lett. 2017, 5, 527-32.
91. Joshi, S. P.; Ramesh, K. An enriched continuum model for the design of a hierarchical composite. Scr. Mater. 2007, 57, 877-80.
92. Romero-Resendiz, L.; El-Tahawy, M.; Zhang, T.; et al. Heterostructured stainless steel: properties, current trends, and future perspectives. Mater. Sci. Eng. R. Rep. 2022, 150, 100691.
93. Zhu, Y.; Wu, X. Perspective on hetero-deformation induced (HDI) hardening and back stress. Mater. Res. Lett. 2019, 7, 393-8.
94. Dong, X.; Gao, B.; Xiao, L.; et al. Heterostructured metallic structural materials: research methods, properties, and future perspectives. Adv. Funct. Mater. 2024, 34, 2410521.
95. Yang, M.; Pan, Y.; Yuan, F.; Zhu, Y.; Wu, X. Back stress strengthening and strain hardening in gradient structure. Mater. Res. Lett. 2016, 4, 145-51.
96. Chen, X.; Wang, W.; Yang, H.; et al. Microstructure evolution, mechanical properties and deformation characteristics of ultrafine-grained annealed pure aluminum. Mater. Sci. Eng. A. 2022, 846, 143320.
97. Wu, X.; Yang, M.; Yuan, F.; et al. Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility. Proc. Natl. Acad. Sci. USA. 2015, 112, 14501-5.
98. Sadeghi, B.; Shamanian, M.; Cavaliere, P.; Ashrafizadeh, F.; Sanayei, M.; Szpunar, J. A. Microstructural and mechanical behavior of bimodal reinforced Al-based composites produced by spark plasma sintering and FSP. Int. J. Adv. Manuf. Technol. 2017, 94, 3903-16.
99. Sadeghi, B.; Shamanian, M.; Ashrafizadeh, F.; Cavaliere, P. FSW of bimodal reinforced Al-based composites produced via spark plasma sintering. Int. J. Mater. Res. 2017, 108, 1045-54.
100. Fu, X.; Yu, Z.; Tan, Z.; et al. Enhanced strain hardening by bimodal grain structure in carbon nanotube reinforced Al-Mg composites. Mater. Sci. Eng. A. 2021, 803, 140726.
101. Tan, Z.; Fu, X.; Zheng, Q.; et al. Toward strength-ductility synergy in trimodal grain structured metal composites by actively tuning coarse domains. Mater. Res. Lett. 2023, 11, 462-70.
102. Salvati, E. Evaluating fatigue onset in metallic materials: problem, current focus and future perspectives. Int. J. Fatigue. 2024, 188, 108487.
103. Liu, R.; Tian, Y.; Zhang, Z.; Zhang, P.; Zhang, Z. Fatigue strength plateau induced by microstructure inhomogeneity. Mater. Sci. Eng. A. 2017, 702, 259-64.
104. Sadeghi, B.; Cavaliere, P.; Sanayei, M. Effect of reinforcement particle size on the corrosion and mechanical properties of spark plasma sintered aluminium matrix composites. J. Microsc. 2025, 297, 18-34.
105. Cavaliere, P.; Jahantigh, F.; Shabani, A.; Sadeghi, B. Influence of SiO2 nanoparticles on the microstructure and mechanical properties of Al matrix nanocomposites fabricated by spark plasma sintering. Compos. Part. B. Eng. 2018, 146, 60-8.
106. Shin, S.; Bae, D. Fatigue behavior of Al2024 alloy-matrix nanocomposites reinforced with multi-walled carbon nanotubes. Compos. Part. B. Eng. 2018, 134, 61-8.
107. Liao, J. Z.; Tan, M. J.; Bayraktar, E. Tension-tension fatigue behaviour of carbon nanotube reinforced aluminium composites. Mater. Sci. Forum. 2013, 765, 563-7.
108. Bi, S.; Liu, Z.; Xiao, B.; et al. Different fatigue behavior between tension-tension and tension-compression of carbon nanotubes reinforced 7055 Al composite with bimodal structure. Carbon 2021, 184, 364-74.
109. Qian, T.; Karaman, I.; Marx, M. Mechanical properties of nanocrystalline and ultrafine‐grained nickel with bimodal microstructure. Adv. Eng. Mater. 2014, 16, 1323-39.
110. Long, J.; Pan, Q.; Tao, N.; Dao, M.; Suresh, S.; Lu, L. Improved fatigue resistance of gradient nanograined Cu. Acta. Mater. 2019, 166, 56-66.
111. Ma, K.; Li, X.; Liu, K.; et al. Improving the high-cycle fatigue strength of heterogeneous carbon nanotube/Al-Cu-Mg composites through grain size design in ductile-zones. Compos. Part. B. Eng. 2021, 222, 109094.
112. Liu, F.; Chen, J.; Dong, J.; Zhang, M.; Yao, Z. The hot deformation behaviors of coarse, fine and mixed grain for Udimet 720Li superalloy. Mater. Sci. Eng. A. 2016, 651, 102-15.
113. Li, C.; Qiu, R.; Luan, B.; He, W.; Li, Z. Hot deformation and processing maps of as-sintered CNT/Al-Cu composites fabricated by flake powder metallurgy. Trans. Nonferrous. Met. Soc. China. 2018, 28, 1695-704.
114. Mokdad, F.; Chen, D.; Liu, Z.; Ni, D.; Xiao, B.; Ma, Z. Three-dimensional processing maps and microstructural evolution of a CNT-reinforced Al-Cu-Mg nanocomposite. Mater. Sci. Eng. A. 2017, 702, 425-37.
115. Bian, X.; Ma, K.; Liu, Z.; Xiao, B.; Wang, Q.; Ma, Z. Hot deformation behavior analysis of CNT/2009Al composite with bimodal heterostructure via constructing a new processing map. Mater. Charact. 2024, 212, 113979.
116. Kim, H. S. On the rule of mixtures for the hardness of particle reinforced composites. Mater. Sci. Eng. A. 2000, 289, 30-3.
117. Tham, M. W.; Fazita, M. N.; Abdul, Khalil. H.; et al. Tensile properties prediction of natural fibre composites using rule of mixtures: a review. J. Reinf. Plast. Compos. 2018, 38, 211-48.
118. Sadeghi, B.; Cavaliere, P.; Nosko, M.; TremboŠovÁ, V.; Nagy, Š. Hot deformation behaviour of bimodal sized Al2O3/Al nanocomposites fabricated by spark plasma sintering. J. Microsc. 2021, 281, 28-45.
119. Sun, C.; Song, M.; Wang, Z.; He, Y. Effect of particle size on the microstructures and mechanical properties of SiC-reinforced pure aluminum composites. J. Mater. Eng. Perform. 2010, 20, 1606-12.
120. Megahed, M.; Attia, M. A.; Abdelhameed, M.; El-Shafei, A. G. Tribological characterization of hybrid metal matrix composites processed by powder metallurgy. Acta. Metall. Sin. 2017, 30, 781-90.
121. Ma, K.; Liu, Z.; Liu, B.; Xiao, B.; Ma, Z. Improving ductility of bimodal carbon nanotube/2009Al composites by optimizing coarse grain microstructure via hot extrusion. Compos. Part. A. Appl. Sci. Manuf. 2021, 140, 106198.
122. Sadeghi, B.; Shabani, A.; Cavaliere, P. Hot rolling of spark-plasma-sintered pure aluminium. Powder. Metall. 2018, 61, 285-92.
123. Yang, Z.; Ni, Z.; Yan, J.; et al. Towards high performance nano multilayered graphene/5052 Al composite: in situ interfacial tailoring via accumulative roll bonding. Carbon 2025, 238, 120213.
124. Li, P.; Li, X.; Dong, Z.; et al. Microstructure evolution and strength-ductility improving mechanism change of heterogeneous CNT/2009Al composite after hot rolling. J. Alloys. Compd. 2023, 948, 169764.
